1. What are the advantages of Deutz engines?

A: The engine is small in size, light in weight, large in power, fuel saving and energy saving

2. Deutz engine model :BF4M1011F, how to interpret?

A: B-- stands for supercharger F-- stands for high-speed four-stroke 4-- stands for 6-cylinder M-- stands for liquid cooling (water or oil cooling)

10- stands for serial number 11- stands for stroke F- stands for increased cylinder diameter

3. Deutz engine 1015 white smoke ~ but it is very large ~ but wait for the car ~ wait for the car to be hot on a little pipe no ~ I replaced the nozzle ~ valve also checked ~ timing also adjusted ~ but it does not work ~~ Excuse me why?

A: Normal, in the winter, because the ambient temperature is too low, generally when starting the diesel engine, there will be different degrees of white smoke phenomenon, after a while, as the engine temperature rises, the phenomenon of white smoke will gradually disappear

4. Deutz engine water tank oil is what happened?

A: Nine times out of ten is the oil radiator is broken, and there is a case that the cylinder pad is washed out, the former amount of oil is larger, and the latter is mainly carbon into the tank, very black and small

5: Where is Deutz engine BF8M1015MC produced in China?

A: The 8-cylinder 1015 series is now only produced in Germany

6: The engine for the generator set has several Deutz in China, where is the production base?

A: Beijing has Beinai, which produces Deutz engines. Shandong Weichai Deutz is currently the largest in production in Weifang. Deutz FAW Dalian diesel engine plant current output is also good. These are the main ones at the moment.

7: My engineering mechanical car is Weichai Deutz WP6.240 engine (high pressure common rail electric injection), the vehicle weight is 27 tons, the speed from idle to 1500 RPM, after stepping on the accelerator, the engine speed can not be directly generated like other cars, but slowly rise, after the speed of 1500, to feel smooth. Water temperature in the case of 60KM constant speed, run 1-1.5km after more than 100 degrees, low speed driving encountered a small slope driving 1KM more than 120 degrees, please help master explain the cause of the problem, the solution?

A: This engine is a substandard product and has serious combustion problems. There's gonna be a lot of thick black smoke. Therefore, the manufacturer makes it accelerate slowly through the adjustment of the program. Judging from your description of the weak engine and the high water temperature. Must have injected a little late, burned badly. To jump the injection advance Angle.

8: Deutz engine can not fire what is going on?

A: The engine does not start there are two main points: 1 cylinder pressure is not enough; 2 The fuel system is faulty. If it is a Deutz water cooler, the fault should be in the fuel system (the possibility of single pump wear is more)

9: Why does Deutz diesel engine smoke black?

A: There are many kinds of problems that cause smoke, and the external influence of fuel, fuel filter, air filter, air intake problem, and the fuel injector problem, high pressure oil pump needs to be validated, if it is EFI, it does not exist.

10: Can't the engine start normally when starting? Or is it difficult to start?

A: Whether the engine rotates when starting, whether the flameout solenoid valve can hear the "snap" sound when the power is on and off, if there is no sound, the flameout solenoid valve does not open or the circuit is faulty.

11: How to find the top dead center of Daoitz 1013 diesel engine?

A: First, there is a mark on the pulley and second, if the mark is gone. Third, remove the injector, insert a metal probe into it and find a cylinder top dead center

12: Deutz BF6M1013 diesel engine when the sudden operation of instability, power decline, exhaust pipe blue and white smoke is what?

A: Check whether the oil supply pipeline is blocked, damaged or leaking at the joint, the carburetor working mixture is less or too thin, the gasoline pump, the oil pump is faulty, the diesel filter is blocked, the compression is insufficient, the diesel tank vent is blocked, the engine is overheated, the valve is stuck or blocked, the valve is blocked, the valve spring is damaged, and the valve is blocked. Piston ring damage, wear or ablation engine blue and white smoke should be checked cylinder liner. Piston, single pump, basic need overhaul.

13: Why does Deutz diesel engine emit blue smoke?

Answer: The blue smoke is mainly caused by burning oil. The reasons are: (1) the piston and cylinder liner are seriously worn, the clearance is too large, and the oil enters the cylinder and burns; (2) improper assembly of the piston ring produces a counterpart; (3) The valve rod and valve guide are seriously worn; (4) the piston ring oil ring is damaged or stuck due to more carbon accumulation, and the function of scraping oil is lost; (5) too much oil, etc.

14: Deutz diesel engine exhaust a lot of white smoke, where is the problem?

A: Diesel engine white smoke We can look for the problem from two directions: the first engine has water into the combustion chamber, the cylinder gasket is damaged, the cylinder water channel has trachoma and cracks, the second engine fuel can not burn on the exhaust smoke, the fuel injection time is too long, the injector atomization is poor and the fuel pump wear

15: Why does Deutz diesel engine crankshaft break during use?

A: Crankshaft in the normal use of the process, generally will not produce broken shaft, because the crankshaft in the design has been guaranteed to have sufficient strength, and to go through strict inspection and balance inspection measurement. The causes of fracture of crankshaft are: (1) trachoma and porosity under the skin of crankshaft; (2) The physical properties, chemical properties and metallographic structure of the crankshaft material do not meet the requirements; (3) the engine is overloaded for a long time, and the crankshaft breaks due to fatigue transition; (4) the main bearing nut is loose or the lock plate is not locked; (5) The oil is too dirty and the lubrication conditions are poor, resulting in the fracture of the tile holding shaft; (6) When the crankshaft is modified with more watts, the fracture is caused by the failure of the shaft journal's R Angle and the grinding to a right Angle, and the crankshaft's bearing strength is reduced; (7) The main bearing cover is broken due to material or processing reasons; (8) The power output end of Deutz diesel engine does not use a clutch device, so that the crankshaft is subjected to the force perpendicular to the direction of the crankshaft center line, and the rear end of the crankshaft fatigue fracture.

16: There are several Deutz engines for generating sets in China, and where is the production base?

A: Deutz's partners in China actually look rather messy.

Beijing has the north, the production of Deutz engines.

Shandong Weichai Deutz is currently the largest in production in Weifang.

Deutz FAW Dalian diesel engine plant current output is also good.

These are the main ones at the moment.

17: Is it normal that there are water droplets in the winter exhaust pipe of Da Chai Deutz?

A: It should be normal, clean car exhaust will shoot a lot of water vapor, water, indicating that your machine combustion and catalytic system is still very good, water vapor will be liquefied when it is cold, it will become water flow out, it is OK, good cars are generally like this, remember when I was a child winter is to see the exhaust pipe, there is white gas coming out, there are drops of water is a good car, broken cars are not like this, Even black smoke, really

18: Deutz diesel engine expansion tank gas is what fault?

A: The cylinder pad flushed it should be the cylinder pad problem, resulting in some high-pressure gas discharged into the expansion tank

19: Why does the turbocharger of Deutz engine turn red?

A: Because the supercharger is a high-speed rotating part, the speed can reach 10,000 revolutions per minute, so the heat of the supercharger is large, if there is no lubricating oil lubrication and cooling or insufficient, it is easy to overheat, and it should be said to turn red

20: Deutz engine change crankshaft how to timing?

A: Install the camshaft first before installing the crankshaft. Just put the point on the camshaft gear to the point on the crankshaft teeth

21: Deutz 1015 engine does not start normally when started? Or is it difficult to start?

A: Whether the engine rotates when starting, whether the flameout solenoid valve can hear the "snap" sound when the power is on and off, if there is no sound, the flameout solenoid valve does not open or the circuit is faulty.

22: Deutz engine can only 1000 RPM, and then it can not add oil why?

A: This is the system in order to protect the safety of the engine and the vehicle, activated the "limping home" function. Limit the amount of fuel injection of the engine, can only run at a low speed, open to the service station for maintenance, generally caused by multi-oil circuit problems, to the service station to find out.

23: Deutz bf6m1013c connecting rod screw play how much force?

A: The connecting rod screw is divided into three steps, the first tightening torque is 30Nm, the first tightening Angle is 60°, the second tightening Angle is 60°.

24: Deutz engine can not fire what is going on?

A: Deutz engine does not start there are two main points: 1 cylinder pressure is not enough; 2 The fuel system is faulty. If it is a Deutz water cooler, the fault should be in the fuel system (the possibility of single pump wear is more)

25: Oshiba Deutz engine smoke?

A: The black smoke is caused by too much diesel into the cylinder, check whether the injector of each cylinder is leaking or stuck. Because it is an electronically controlled diesel engine, it should also check whether the sensors related to the amount of fuel injection are damaged, such as water temperature sensors, common rail pressure sensors, intake pressure sensors, etc. In addition to the failure of the supercharger and EGR system may also cause black smoke, pay attention to the quality of the diesel oil, too much impurities will affect the work of the fuel system and cause black smoke.

26: What is the relationship between DEUTZ and Dacha??

A: DEUTZ is one of the world's leading diesel engine manufacturers, created by the invention of the internal combustion engine. The company is joined by Cummins of the United States and Perkins of the United Kingdom as the top three.

DEUTZ entered into a joint venture with the former FAW Jiefang Dalian Diesel Engine Co., LTD in 2008, with DEUTZ and FAW each holding 50% of the shares. The name is Deutz FAW (Dalian) Diesel Engine Co., LTD.

27: In what country are Deutz engines made?

A: Germany Deutz AG is headquartered in Cologne, Germany on the Rhine River. For many years, Deutz brand diesel engine is famous for its leading product. About DEUTZ: In 1864, Mr. Otto and Mr. Langen jointly established the world's first engine production plant, which is the predecessor of today's Deutz company

28: Liberation j6 New Deutz engine burn oil?

A: In general, vehicles with burning oil will have varying degrees of exhaust gas "blue smoke" symptoms, oil consumption increases significantly, and oil will have to be added in a short period of time. The burning of oil in the vehicle will lead to the increase of carbon accumulation in the combustion chamber, the decrease of the economy and power of the vehicle, and the excessive exhaust emissions. So, what is the reason that can cause the problem of burning oil? Simply put, there are mainly the following points: such as the poor sealing of the cylinder, mainly the coordination gap between the piston and the cylinder wall is too large, the improper installation of the piston ring or its sealing is poor, etc., the oil on the cylinder wall will enter the combustion chamber too much, causing the phenomenon of burning oil. In addition, the sealing performance of the valve seal ring will also cause the phenomenon of burning oil, such as the crankcase ventilation valve damage, so that the oil with the crankcase gas and enter the cylinder to participate in combustion, or the crankcase vent blockage makes the pressure in the crankcase too large, will also make the oil jump into the increase, the phenomenon of burning oil. For some old cars, due to the increase in the wear gap between the piston and the cylinder wall, different degrees of...

29:111 Deutz engine oil pressure indicator shows abnormal, how to solve?

A: Engine oil pressure indicator shows abnormal: fault determination: true fault. Cause analysis: When the indicator indicates that the oil pressure is abnormal, it indicates that the engine component is faulty. If the oil gauge pointer shows a low pressure or the meter pointer shows a large fluctuation, it may be due to the wear of the oil pump, the filter is blocked by dirt, the oil suction filter screen is exposed to the oil surface, the oil level is low, the air is mixed in the oil circuit and the pressure gauge is faulty. In addition, the low viscosity of lubricating oil, poor oil circuit seal and lubricity, too large undercooling viscosity of lubricating oil, and too much lubricating oil sludge deposition will also cause abnormal oil pressure indicator display.

30: Does the Deutz engine use the flywheel end as the first cylinder?

A: Deutz engine is made in Germany, according to German rules, Deutz made in Germany are the first cylinder with the flywheel end.

31: Deutz diesel engine exhaust a lot of white smoke, where is the problem?

A: Diesel engine white smoke We can look for the problem from two directions: the first engine has water into the combustion chamber, the cylinder cushion is damaged, the cylinder water channel has trachoma and cracks, the second engine fuel can not burn on the exhaust smoke reasons are injection time is too long and the injector atomization is poor and the fuel pump wear.

32: What makes Deutz's 280 HP engine so powerful?

A: The cause of the up and down vibration may not be the same as most of the others, but all in all, it is caused by the dynamic imbalance of the rotating parts, the main parts include the piston, connecting rod, and the three large parts of the crankshaft, and then there is a secondary reason is that the combustion of each cylinder is not the same, such as a slightly early combustion cylinder or even an abnormal combustion cylinder. Can cause vibration, need to be analyzed according to the specific situation, there is a need to explain, you see is the up and down vibration, only the up and down direction of the vibration is more obvious, does not mean that it is a simple up and down vibration!

32: Deutz engine. How about that? What kind of car is equipped with this engine?

A: DEUTZ generally refers to the Deutz diesel engine produced by Deutz Company, under the trade name Deutz. In 1864, Mr. Otto and Mr. Langen jointly established the world's first engine production plant, which is the predecessor of today's Deutz company. The first engine invented by Mr. Otto was a gas engine that burned gas, so Deutz has been involved in gas engines for more than 140 years. Deutz is a loyal strategic partner of many international well-known brands such as Volvo, Renault, Atlas, Semay, etc. The diesel engines produced are mainly supporting engineering machinery, concrete towing pumps, automobiles, power generation, ships and other fields. Faw and its joint venture in Dalian production, mainly used for liberation cars.

33: What symptom is the cylinder cushion broken?

A: 1. The car cylinder cushion is broken, the mixture inhaled into the engine will leak during the compression process, the light will cause the engine to be weak, the heavy will cause the engine compression ratio is insufficient and cannot be ignited and cannot be started (also common single cylinder does not ignite the engine idle when the car shakes badly and the low speed is weak).

2. It is easy to determine that the cooling water (antifreeze) has oil stains and the cooling water is consumed too fast, and the water temperature is high. When you open the tank cover and add water to the tank until you can see the water surface, you can see that there is a layer of oil floating on the water surface (this is the oil that lubricates the cylinder and piston and presses into the water channel into the coolant when the piston moves up to compress the gas).

34:3 big firewood 4 cylinder Deutz single pump start urgent refueling they smoke what reason?

A: There are two reasons for black smoke, one is that the oil supply is too large, so that the combustion is not complete, so the black smoke, the other is the wrong timing, the oil injection is too early, you can adjust the oil supply time later to solve the problem

35: Does the Volvo excavator have Deutz engines?

A: Hello, EC55 such a small excavator with the Japanese Yanma engine, 140-290 with the German Deutz, 360-700 is Volvo engine, belongs to the Deutz brand Volvo, accessories universal.

36: Deutz Engine TCD2015 and BF10